Fans specifically designed for elimination of smoke,
fumes, or vapors in spray booths and other
hazardous locations.
Direct drive models available from 12" to 60", dry or wet environments and for
heat ranges up to 375 deg F.
Features:
Fan can be installed to operate in any position.
Propellers - non-sparking cast aluminum.
Fan housing is heavy gauge steel with angle iron rings welded on each end for superior strength.
Eight holes in angle iron ring for easy mounting.
Bearings - two sealed industrial grade ball bearings mounted in a precision machined,
cast aluminum, one piece, completely enclosed bearing housing for exceptional bearing life.
External grease fitting is standard.
Motors - only high quality industrial motors are used.
Fans with motors are completely assembled, drives properly adjusted, and fan tested before shipping.
Motors are available in open drip proof, totally enclosed or explosion proof as specified.
Cast steel and turned steel sheaves.
Direct Drive Tube axial fan
Accessories And Options
Companion Flanges - For easy installation.
Protective Coatings - Epoxy or Eisenheiss coatings provide good protection against most
corrosive agents.
Access Doors - Hinged access doors,
gasketed and latched. For period inspection.
Fan Guards - 1/2" O.S.H.A. approved safty
guards for inlet or outlet.
Motors - Motors are standard NEMA design
and are available in open drip proof, totally enclosed and
explosion proof. All ball bearing.
Model Df - Fans should be specified for
all applications where it is permissible to allow the motors
to run in the air stream.
Serving Industry Since 1906
Axial Fans
